Key Features
24 × 10/100/1000 Mbps Gigabit Ethernet RJ45 ports provide reliable wired connectivity for computers, printers, servers, access points, IP phones, cameras and other network devices.
12 Gigabit Ethernet ports support IEEE 802.3af Power over Ethernet for compatible devices such as wireless access points, VoIP phones and IP cameras.
100W total PoE budget supplies power to connected PoE devices through standard Ethernet cabling.
2 × Gigabit SFP uplink slots support compatible fiber-optic transceivers and copper SFP modules for connections to other switches and network infrastructure.
The two SFP ports share their connections with two 10/100/1000 Mbps RJ45 ports, with one interface active per combo port at a time.
48 Gbps switching capacity supports high-throughput data transfer across the switch.
Approximately 35.7 Mpps forwarding performance provides wire-speed, nonblocking packet forwarding for business network traffic.
Plug-and-play unmanaged operation allows the switch to work without software configuration, command-line administration, or complex network setup.
Auto-negotiation automatically selects the appropriate speed and duplex mode for connected Ethernet devices.
Auto MDI/MDIX automatically detects cable type and helps eliminate the need for crossover cables.
IEEE 802.3x flow control helps manage traffic between connected devices operating at different speeds.
IEEE 802.3az Energy Efficient Ethernet helps reduce power consumption during periods of low network activity.
Jumbo-frame support accommodates larger Ethernet frames to improve efficiency for selected data-transfer workloads.
LED indicators provide at-a-glance information about system power, link status, network activity, speed and PoE operation.
Fanless design helps provide quiet operation in office environments, classrooms, retail spaces and small network closets.
Desktop, wall-mountable and rack-mountable installation options support flexible deployment.
Benefits
- Connects up to 24 wired Gigabit Ethernet devices through a single compact unmanaged network switch.
- Powers up to 12 compatible PoE devices without requiring separate power adapters or nearby electrical outlets.
- Reduces installation costs by delivering network connectivity and electrical power over a single Ethernet cable.
- Supports wireless access points, VoIP phones, IP cameras, access-control devices and other PoE endpoints with a 100W power budget.
- Provides flexible fiber and copper uplink options through two shared Gigabit SFP combo ports.
- Improves network performance with 48 Gbps switching capacity and approximately 35.7 Mpps forwarding performance.
- Simplifies installation with plug-and-play unmanaged operation that requires no IP address, software configuration, or ongoing administration.
- Operates quietly in office and customer-facing environments with a fanless design.
- Helps reduce energy use through IEEE 802.3az Energy Efficient Ethernet and automatic power-efficiency features.
- Supports reliable connectivity for small offices, retail locations, classrooms, branch networks, warehouses and home offices.
- Provides flexible installation through desktop, wall-mounting, or rack-mounting options.
- Helps reduce network troubleshooting time through simple LED indicators for power, link, activity, speed and PoE status.
| Manufacturer | Cisco |
|---|---|
| Manufacturer Part Number | CBS110-24PP-NA-RF |
| Product Name | Cisco CBS110-24PP 24-Port Gigabit Unmanaged Network Switch |
| Product Type | Networking Switch |
| Network layer | Layer 2 |
| Management | Unmanaged; no IP-based configuration required |
| Total RJ45 ports | 24 × 10/100/1000BASE-T Gigabit Ethernet |
| Standard Gigabit ports | 24 copper Gigabit Ethernet ports |
| PoE ports | 12 Gigabit Ethernet PoE ports |
| Non-PoE ports | 12 Gigabit Ethernet ports |
| SFP ports | 2 × 1GbE SFP slots |
| SFP interface type | 1000BASE-X SFP |
| SFP port configuration | Shared combo ports with two RJ45 interfaces |
| Combo-port operation | Each SFP interface shares its corresponding RJ45 port; only one interface in each combo pair operates at a time |
| PoE standard | IEEE 802.3af PoE |
| PoE power per port | Up to 15.4W per PoE port, subject to the total power budget |
| Total PoE budget | 100W |
| Supported PoE devices | Wireless access points, IP phones, IP cameras, access-control devices, and other IEEE 802.3af endpoints |
| Switching capacity | 48 Gbps |
| Forwarding rate | 35.7 Mpps with 64-byte packets |
| Forwarding architecture | Wire-speed, nonblocking switching |
| MAC address table | Up to 8,192 MAC addresses |
| Jumbo-frame size | Up to 9,216 bytes |
| Packet buffering | Store-and-forward switching with packet buffering |
| Ethernet standards | IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, and IEEE 802.3ab Gigabit Ethernet |
| SFP standard | IEEE 802.3z 1000BASE-X |
| Flow control | IEEE 802.3x |
| Auto negotiation | Supported |
| Auto MDI/MDIX | Supported |
| Duplex support | Full-duplex and half-duplex on applicable interfaces |
| VLAN support | Not configurable; unmanaged plug-and-play operation |
| Layer 3 routing | Not supported |
| QoS configuration | Not user-configurable |
| Link aggregation | Not supported as a user-configurable feature |
| Spanning Tree Protocol | Not user-configurable |
| Network authentication | Not supported |
| Access control lists | Not supported |
| DHCP snooping | Not supported |
| Multicast management | Not user-configurable |
| Web management | Not supported |
| Command-line interface | Not supported |
| SNMP | Not supported |
| Cisco Business Dashboard | Not supported |
| Cisco Network Plug and Play | Not supported |
| Firmware management | No user-configurable firmware-management interface |
| LED indicators | Power, link/activity, speed, and PoE status indicators |
| PoE status indication | LED indicators show PoE availability or delivery status on supported ports |
| Energy efficiency | IEEE 802.3az Energy Efficient Ethernet |
| Fan design | Fanless or quiet-cooling design, depending on regional hardware revision |
| Form factor | Desktop, wall-mountable, and rack-mountable |
| Rack size | 1RU |
| Rack compatibility | Standard 19-inch equipment racks |
| Wall mounting | Supported |
| Desktop placement | Supported |
| Unit dimensions | Approximately 440 × 203 × 44 mm (W × D × H) |
| Dimensions in inches | Approximately 17.32 × 7.99 × 1.73 inches |
| Unit weight | Approximately 2.85–2.98 kg, depending on regional model and listing |
| Power input | 100–240V AC |
| AC input frequency | 50–60 Hz |
| Power supply | Internal AC power supply |
| System power consumption without PoE | Approximately 21.02–21.03W |
| Maximum system power with PoE | Approximately 122.11–124.06W, depending on input voltage and operating conditions |
| Maximum PoE output | 100W total |
| Maximum heat dissipation | Varies with traffic load and PoE utilization |
| Cooling airflow | Model and hardware-revision dependent |
| Operating temperature | Approximately 0°C to 50°C (32°F to 122°F) |
| Storage temperature | Approximately -20°C to 70°C (-4°F to 158°F) |
| Operating humidity | Approximately 10% to 90%, noncondensing |
| Storage humidity | Approximately 10% to 90%, noncondensing |
| Operating altitude | Up to approximately 3,000 m (9,843 ft) |
| Storage altitude | Up to approximately 4,570 m (15,000 ft) |
| Supported copper cable | Category 5e or better twisted-pair Ethernet cable |
| Maximum copper Ethernet distance | Up to 100 m using supported twisted-pair cabling |
| Supported SFP media | Compatible Cisco 1000BASE-X fiber or copper SFP transceivers |
| SFP fiber options | Multimode or single-mode fiber, depending on the selected SFP module |
| SFP uplink distance | Depends on the installed SFP transceiver and fiber type |
| Typical applications | Small-business networking, IP surveillance, VoIP, wireless access, retail, education, offices, and branch locations |
| Regulatory compliance | FCC Class A, CE, UL, CB, CSA, NOM, and applicable regional certifications |
| Environmental compliance | RoHS and applicable Cisco environmental requirements |
Frequently Asked Questions
Cisco CBS110-24PP 24-Port Gigabit Unmanaged Network Switch (NA) | Refresh
How many Gigabit Ethernet connections does the CBS110-24PP provide?
How many ports support Power over Ethernet?
What is the total PoE power budget?
Which PoE standard does the CBS110-24PP support?
Can the switch power IP phones?
Can it power wireless access points?
Can the CBS110-24PP power IP security cameras?
Does the CBS110-24PP need to be configured before use?
Does the switch have a web management interface?
Does the CBS110-24PP support SFP modules?
What does “combo port” mean?
Which SFP modules does Cisco list as compatible?
How far can a fiber uplink reach?
Does the switch support loop detection?
Does it support traffic prioritization?
Does the CBS110-24PP support Energy Efficient Ethernet?
Can the CBS110-24PP be rack mounted?
What are the dimensions and weight of the switch?
Does the CBS110-24PP use an internal power supply?
What types of deployments are best suited for the CBS110-24PP?
Cisco CBS110-24PP 24-Port Gigabit Unmanaged Network Switch (NA) | Refresh
Cisco
