Key Features
IEEE 802.3bt PoE++ support for powering modern high-demand access points.
Up to 5 Gbps multigigabit Ethernet support with auto-negotiation for 10M, 100M, 1G, 2.5G and 5G speeds.
1 x multigigabit input port and 1 x multigigabit output port for simple inline installation.
Up to 50W maximum output power to support higher-power wireless devices.
Built-in protection against short circuits, overloads, disconnects and non-compliant device damage.
Compatible with Cisco Catalyst access points and designed for enterprise wireless deployments.
AC input support for 120V and 230V environments.
Compact external power injector format for easy deployment in offices and network closets.
Benefits
- Simplify Wi-Fi deployment by delivering power and data through one Ethernet cable.
- Place access points where coverage is strongest, without depending on nearby AC outlets.
- Support next-generation wireless access points that need higher power and multigigabit throughput.
- Reduce installation costs by avoiding extra electrical work and power injectors.
- Protect connected devices with automatic safeguards that help prevent power-related damage.
- Keep upgrades simple by adding PoE++ capability without replacing your existing switching infrastructure.
| Manufacturer | Cisco |
|---|---|
| Manufacturer Part Number | AIR-PWRINJ7-RF |
| Product Name | Cisco AIR-PWRINJ7 Multigigabit 802.3bt Power Injector |
| Product Type | PoE injector |
| PoE Standard | IEEE 802.3bt |
| Compatibility | Cisco Catalyst access points |
| Input Ports | 1 x 10/100/1000/2500/5000 BASE-T autosensing RJ-45 |
| Output Ports | 1 x 10/100/1000/2500/5000 BASE-T autosensing RJ-45 |
| Maximum Data Rate | Up to 5 Gbps |
| Input Voltage | 120 V AC, 230 V AC |
| Nominal Input Voltage Range | 100 to 240 V AC |
| Input Frequency | 50 to 60 Hz |
| Nominal Input Frequency Range | 47 to 63 Hz |
| Maximum Input Current | 2 A |
| Minimum Output Voltage | 54 V DC |
| Maximum Output Voltage | 57 V DC |
| Rated Output Voltage | 56 V DC |
| Maximum Output Current | 1.61 A |
| Maximum Output Power | 50 W |
| Protection Features | Overcurrent, overload, overvoltage, short-circuit, and high-temperature protection |
| Efficiency | Greater than 88% at 115 V AC / 60 Hz and greater than 89% at 230 V AC / 50 Hz |
| No-Load Power Consumption | Less than 0.21 W at 115 V AC / 60 Hz and less than 0.15 W at 230 V AC / 50 Hz |
| Form Factor | External |
| Physical Dimensions | 1.5 x 2.6 x 5.5 in |
| Operating Temperature | 0 C to 50 C |
| Storage Temperature | -20 C to 70 C |
| Operating Humidity | 10% to 90% non-condensing |
| Standards Compliance | IEEE 802.3bt, FCC Part 15 Class B, and other listed safety/emissions standards |
Frequently Asked Questions
Cisco AIR-PWRINJ7 Multigigabit 802.3bt Power Injector | Refresh
What is the primary purpose of the Cisco AIR-PWRINJ7?
What PoE standard does the AIR-PWRINJ7 support?
Why is 802.3bt important?
Is the AIR-PWRINJ7 designed for Cisco access points?
Does the injector support multigigabit networking?
Can it be used when a PoE switch is unavailable?
Does the device reduce cabling requirements?
Is the AIR-PWRINJ7 suitable for Wi-Fi 6 deployments?
Can it support Wi-Fi 6E access points?
Is installation complicated?
Can businesses use it for network expansion projects?
Does the injector provide both power and data?
Is the AIR-PWRINJ7 suitable for educational institutions?
Can healthcare facilities benefit from this device?
Does the injector require a managed switch?
Is the device suitable for enterprise wireless deployments?
Can it support remote access point installations?
Is the AIR-PWRINJ7 a genuine Cisco accessory?
Can it help optimize wireless coverage design?
Why choose the Cisco AIR-PWRINJ7 Multigigabit 802.3bt Power Injector?
Cisco AIR-PWRINJ7 Multigigabit 802.3bt Power Injector | Refresh
Cisco
